Dental double-head double-sided polishing machine

Dental double-head double-sided polishing machine

Safety line speed: 35 m/s
Rated voltage: 22v/110v
Rated frequency: 50HZ ± 10%
Input power: 550W
Synchronous speed: 3000R/MIN
Package size: 68*55*48cm
Packing weight: 25KG

Cutting and polishing machine, in order to ensure your safety and correct use, maintenance and maintenance of the cutting and polishing machine, please read the instructions carefully before use.
1. Precautions
1. Please use the voltage and frequency specified on the nameplate of the machine.
2. Before using the machine, the shell must be reliably grounded•
3. Please do not use it in places with flammable and explosive gases.
4. It is strictly forbidden to disassemble the safety cover to use this machine•
5. Do not use the machine outdoors.
6. Do not use the machine in the rain and water splashing place.
7. Keep children away from the running machine.

3. Instructions for use:
1. This machine can be used in places where the altitude does not exceed 1000 meters, the ambient temperature is -15°C-40°C, and the relative humidity of the surrounding air is not greater than 95%.
2. Check the parts carefully before use, whether they are damaged due to transportation, whether the fasteners are loose, etc., if any, they should be repaired and tightened.
3. Before using the machine, its insulation resistance must be measured with a megohmmeter above 500 volts, and the value should be greater than 1 megohm
4. The machine is equipped with two plexiglass protective glasses, which are connected to the adjustable guard and installed on the protective cover, which can be adjusted according to needs
Angled for dust protection•
5. There are fixing holes on the base of the machine, which can be fixed with screws if necessary.